FAQ
- Q:Why is the image fuzzy?
- A:The Projector-to-screen distance outside of limits. Image not focused. Please Place projector 200-1800 mm from wall. Turn focus to sharpen image.
- Q:Why the projector does not run on battery power?
- A:Plug in AC adapter and turn power switch off to charge battery. Replace battery if it will not hold a charge.
- Q:Why LED flashing red?
- A:Battery is low. Please Plug in AC adapter and turn power switch off to charge battery.
- Q:Why LED is green?
- A:Projector in Power Saver Mode. Projected images will return when input signal resumes.
- Q:Why LED is orange?
- A:Battery is charging. LED is orange during charging and goes off when battery is fully charged.
- Q:Why is the Video or VGA icon is flashing?
- A:Because No input signal is detected by projector. Please turn on power for input source
- Q:Why Video/VGA icons alternate flashing?
- A:Because No input cable is detected.. Please Connect input cable and power on input source.
Copyright © 2009 | Best Jump Technology Co., Ltd.
16F-3, No. 508, sec. 5, Chung Hsiao E. Rd.,Xin Yi District, Taipei City, 110 Taiwan, R.O.C
TEL:886-2-2346-3899
FAX:886-2-2346-3855
Designer by
Mr.Ray